Modifications Made on Jetlasers Ti Laser Pointers

Online, August 4, 2010 (Newswire.com) - The world's only Ti laser pointers released by Jetlasers finally showed up this month but it's yet to be improved to be a perfect laser model. All considered, it successfully incorporates the nLight laser diode, efficient crystal assembly and most intuitive features such as focus adjustable mechanism, military-grade waterproof degree, shock resistance, constant current circuit, etc.

The Ti laser pointers are very worthy of further work to clear up all flaws. The following are the features that will be added and worthy of the thinking of many portable laser pointer manufacturers.

1. Increase the diameter of the main laser body to fit a widest variety of CR123A or 16340 batteries in today's market.
Notes:There are about14 types of CR123A and 16340 batteries variations available here, and the max diameter difference between is 0.7mm to 1.0mm, so it's natural that a claimed CR123A-oriented laser pointer cannot fit a particular kind of CR123A or 18650 rechargable battery. Jetlasers is going to increase the insider diameter by 0.1mm, so that the upgraded laser pointer body can fit the widest variety of batteries in today's market.

2. Most laser pointers tend to show their circuit to the laser users, but just imagine when those restless laser hobbyists who are always read to tamper with the circuit or other components. That's why Jetlasers prepares to add the protection outside the circuit and make it inaccessible to the users.

3. Drilling another hold in every battery tube for lanyards.
Since the Jetlasers Ti laser pointers are perfect for outdoor uses thanks to its remarkable waterproof standard and shock resistance, it will be a fashion to carry it everywhere you go, so some pinholes for lanyards are necessary, both in main laser tube and back-up laser tube. From the first version of a Ti waterproof laser pointers 100mw at Http://www.jetlasers.net , you may see that the end part of the 1st battery tube of the BU model is with threads, so it might be difficult to drill the hole through the thread, in case it affects the smooth connection of the BU tailcap to it.

4. Since you can imagine how the pure titanium makes you feel when you touch it, it takes no second thought that the surface of the ti laser pointer body must be very smooth or slippery. That's also one of the paradoxical impacts those first group of laser pointers gave people.

Therefore, Jetlasers is going to increase the "knurling" on both the focus head and the tailcap on the outer edge to increase its antislip features, so that it will be much easier to turn and ensure a secure grip.