Pit Jacks For Garages By Cattini: Convenience In Changing Oil

Online, August 9, 2012 (Newswire.com) - In order to maintain a proper functioning of your car's engine, is always recommended to check the level of engine oil. The oil has several purposes, being the lubrication a primary objective, since it is protecting the consumption of the metallic surfaces and reducing the friction generated between them. Another oil's function is to avoid the mechanical heating, transferring the heat from the warmest area to that coldest. The oil also promotes the cleanliness of the mechanic parts, leaving the contaminants agents in suspension, besides acting as a sealant between the elastic band and the cylinder.

Because of its great importance, the oil should be checked and measured constantly. There are basically 3 types of oil in the market: the mineral oil, the synthetic oil, and the semi-synthetic oil. The mineral one is obtained from the petroleum components, the synthetic is made from chemical reactions, and the oil semi-synthetic is a mix of both. But, which one is the most appropriate for your car? In general, in the owner manual's car has indicated the best suitable oil for each kind of car, however there are some variations according to the use of the vehicle.

If the car runs only in the city, a semi-synthetic oil is more appropriated. With frequent stops and accelerations in small routes, the requirement of the engine will be higher. Even though it is more expensive, this type of oil offers a great protection to the engine, by the fact it does not flow much, and anoints the engine parts for longer, protecting better them in cold starts and the stationary periods.

On the other hand, if the car is used mainly in highways which require speed, the synthetic oil is most recommended. This type of oil guarantees the best results in terms of lubrication and mechanic protection. For long stretches that do not require much effort (gear shifting, torn, etc.) and high speeds are not allowed, the mineral oil is ideal.

The frequency of oil change is indicated in the vehicle handbook. When the indicated mileage is reached, you just go to your garage confidence. The mechanic should lift the car for a better view and convenience. Thinking about the operator's security and practicality, Cattini Oleopneumatica manufactures pit jacks for garages using high quality raw materials.

The return of the piston takes place in semi-automated mode through a manual valve, and the two descent valves ensure a perfect tight in every situation and controlled speed under load. All assembly stages are monitored by the Cattini's highly skilled personnel, providing a further check on all individual details and hence of each type of pit jacks, hydraulic jacks and pneumatic jacks. Visit our web site: www.automotive-jacks.com