Rapid Strength Concrete Market Demand to Hit USD 424 Bn by 2026; Global Market Insights, Inc.

SELBYVILLE, Del., July 7, 2020 (Newswire.com) - ​Global Market Insights, Inc. has recently added a new report on the rapid strength concrete market which estimates the market valuation for rapid strength concrete will cross US$ 424 billion by 2026. Growing infrastructure projects in Asia Pacific and North America shall drive the demand for the rapid strength concrete market over the forecast period.

Traditional cement, which is a Quasi-brittle material and is exposed to ductile failure under high stress, low tensile strength, low specific strength and formwork, is labor-intensive and time-consuming. Rapid strength concrete is produced with Type III high-early portland cement and contains a non-chloride accelerator. This concrete develops high resistance within a few hours of being manufactured. It removes the formwork early and moves forward in the building process in much lesser time, repair road surfaces which becomes operational in a much lesser time compared to conventional concrete. The aforementioned trends are anticipated to have a positive influence on the product demand, which will help to attain a major market share in the overall concrete industry.

Request a sample of this research report @ https://www.gminsights.com/request-sample/detail/2245

Rapid strength concrete with compressive strength more than 80 MPa in 24 hours is mainly used in constructing highways and airfields and is likely witness gains of close to 6% CAGR from 2020 to 2026. An increasing number of airfields shall augment product demand. For instance, India plans to open 100 new airports in the next five years thus driving the market growth in the coming years.

Increasing metro projects around the world have grown the demand for the construction of tunnels. There is a growing use of sprayed concrete for the permanent construction of tunnel linings. The product demand is set to increase for tunnel construction and shall hold a demand share of approximately 13% in 2026.

The Asia Pacific market is the fastest-growing market owing to rapidly growing economies in the region such as India, China, Indonesia, Malaysia, etc. Asia Pacific market is projected to grow with over 8.5% CAGR by volume over the forecast time period. The growth in the infrastructure market in Asia-Pacific will boost the market for rapid strength concrete for the projected period of time.

Browse key industry insights spread across 272 pages with 289 market data tables & 26 figures & charts from the report, “Rapid Strength Concrete Market Share & Forecast, 2020-2026” in detail along with the table of contents:

https://www.gminsights.com/industry-analysis/rapid-strength-concrete-market

Some major findings of the rapid strength concrete market report include:

• Increasing need for upgrading transport infrastructure in North America shall drive market growth over the projected timeframe.
   
• Rising population in the Asia Pacific propelling the housing market in the region. Subsequently driving product demand.
   
• Increasing roadway and highway projects in Europe have created huge potential for the rapid strength concrete industry players.
   
• Growth of airfields in developing economies will increase the product penetration emerging markets such as Malaysia, India, Indonesia, etc.
   
• Increasing infrastructure investment in the Middle East & Africa and Latin America will augment product demand over the forecast timeframe.

Major players engaged in the industry are CEMEX S.A.B. de C.V, Aggregate Industries UK Ltd., Sakrete, Boral Limited, Bostik, Short Load Concrete Inc., Perimeter Concrete Ltd., Sika Corporation, etc.

The market is fragmented with a large number of international and regional players manufacturing the product. To increase market share, players are investing in building new concrete production plant. For instance, in August 2019, CEMEX UK invested in a new ready-mixed plant and replaced the aged Eversley ready-mixed concrete plant.

Browse the complete table of contents @ https://www.gminsights.com/toc/detail/rapid-strength-concrete-market

Partial chapters of report table of contents (TOC):

Chapter 3.    Rapid Strength Concrete Industry Insights

3.1.    Industry segmentation

3.2.    Industry size and forecast, 2016 – 2026

3.2.1. COVID-19 impact on industry size

3.3.    Industry ecosystem analysis

3.3.1. Profit margin analysis

3.3.2. Value addition at each stage

3.3.3. Distributor channel analysis

3.3.3.1.    Covid-19 impact on distribution

3.3.4. Vendor matrix

3.3.4.1.    List of key manufacturers

3.3.4.2.    List of key/potential customers

3.4.    Raw material trends

3.4.1. Covid-19 impact on raw materials

3.5.    Technology trends

3.6.    Industry impact forces

3.6.1. Growth drivers

3.6.1.1.    Revival of the U.S. and European construction industry

3.6.1.2.    New construction projects in the U.S.

3.6.1.3.    Rapidly growing building & construction industry in Asia Pacific

3.6.1.4.    Rising roads construction

3.6.1.5.    Increasing infrastructure projects around the world

3.6.2. Industry pitfalls & challenges

3.6.2.1.    Lack of awareness in emerging economies

3.7.    Regulatory landscape

3.7.1. U.S.

3.7.2. Europe

3.7.3. China

3.8. Growth potential analysis,2019

3.9.    Competitive landscape

3.9.1. Strategic dashboard

3.9.2. Patent analysis

3.10.    Porter’s analysis

3.10.1.    Supplier power

3.10.2.    Buyer power

3.10.3.    Threat of new entrants

3.10.4.    Industry rivalry

3.11.    Regional price trends

3.11.1.    Cost structure analysis

3.11.1.1.    R & D cost

3.11.1.2.    Manufacturing & equipment cost

3.11.1.3.    Raw material cost

3.11.1.4.    Distribution cost

3.11.1.5.    Operating cost

3.11.1.6.    Miscellaneous cost

3.11.2.    Price by product

3.11.3.    COVID-19 impact on price trends

3.12.    PESTEL analysis

3.13.    COVID-19 impact on Rapid strength concrete market, by application

3.13.1.    Roads/bridges

3.13.2.    Building/floors

3.13.3.    Tunnels

3.13.4.    Airfield

3.13.5.    Highway

3.13.6.    Others

Browse related report:

North America Cast-In-Place Concrete Flooring Market Size By Sector (Logistics & Distribution/Warehousing [E-commerce/E-Fulfilment, 3PL Warehousing, Container Storage, Retail/FMCG, Lumber Yard Storage & Manufacturing], Automotive Industry [Assembly, Parts Warehousing], Aviation Industry [Assembly, Hangars & Apron Slabs, Maintenance], Pharmaceutical/Chemical Industry [Factory, Warehousing], Data Centers, Recycling Facilities, Textile [Manufacturing, Warehousing], Food & Beverage [Manufacturing, Warehousing], Heavy Equipment/Construction Equipment Manufacturing & Distribution), By Technique (Prestressed Concrete, Steel Fiber Reinforced Concrete, Traditional Floor), Industry Analysis Report, Country Outlook, Application Growth Potential, Price Trends, Competitive Market Share & Forecast, 2020 – 2026

https://www.gminsights.com/industry-analysis/north-america-cast-in-place-concrete-flooring-market

About Global Market Insights

Global Market Insights, Inc., headquartered in Delaware, U.S., is a global market research and consulting service provider; offering syndicated and custom research reports along with growth consulting services. Our business intelligence and industry research reports offer clients with penetrative insights and actionable market data specially designed and presented to aid strategic decision making. These exhaustive reports are designed via a proprietary research methodology and are available for key industries such as chemicals, advanced materials, technology, renewable energy and biotechnology.

Contact Us:

Arun Hegde
Corporate Sales, USA
Global Market Insights, Inc.
Phone: 1-302-846-7766
Toll Free: 1-888-689-0688
Email: sales@gminsights.com

Source: Global Market Insights, Inc.